![](https://www.otlas.com/wp-content/uploads/2023/10/render-CX-T.jpg)
Maximum Power
1500 W
Maximum Area
1600×1600 mm
CX-T, the laser cutting and marking system for textiles
The CX-T laser machine can work textiles with a maximum height of 1600 mm, in continuous or stepped mode.
CX-T is the ideal system to process jeans, textile for clothing and finished garments, since it allows creating strong customizations.
CX-T can process the following materials:
- Denim
- Cotton
- Linen
- Viscose
- Polyester
- Microfiber
- Polyamide
- Silk
![](https://www.otlas.com/wp-content/uploads/2023/10/CX-T-taglio-jeans-OT-LAS.jpg)
![](https://www.otlas.com/wp-content/uploads/2023/10/Marcatura-laser-rotolo-CX-T-OT-LAS.jpg)
Advantages of the CX-T laser machine
The CX-T machine is particularly suitable for the finishing of jeans textile, to replace the traditional methods of bleaching, abrasion, decoration and marking.
The CX-T highlights:
- It is possible to realize many variations and accurate effects in all nuances.
- Increased productivity, reduced consumption and environmental impact compared to traditional methods.
- Execution process made easier thanks to integration with Smart DRAW and Engraving Manager software solutions.
Technical characteristics
Laser cutting and marking on textile stands out for its precision and flexibility. Marking grants special effects such as vintage for Jeans or embossed velvet. Thanks to laser, the textile edge comes out neat and perfectly sealed.
Blade RF | 333 – 555 – 777 – 888- 1222 – 1555 |
Rated power (W) | 350 – 550 – 750 – 850- 1200 – 1500 |
Electric consumption | 9 – 10 – 12 – 13 – 22 – 23 |
Useful marking area (mm) | from 800×800 to 1600×1600 – Rated Spot from 0.4 mm to 0.8 mm |
X-axis automatic movement | stroke: 1000 mm |
Electric Power Supply (VAC) | machine: 400 3F+T ±10% – 50 Hz refrigerator: 400 3F+T ±10% – 50 Hz |
Software for CX-T
A graphic and operating software with specific Corel Draw graphic engine for the realization of files and for the entire system functioning. For each work, it is possible to assign geometric parameters, processing parameters and set any drawing repetitions or compositions, in case the system is equipped with automatic table.
A machine management software that can open various formats such as PLT, BMP, etc. Engraving allows setting speed and power parameters, and creating processing lists.